Publications

Google Scholar
Fatigue Crack Growth of a Hot Mix Asphalt using Digital Image Correlation

Journal Articles

  1. Cano, J. A., and Stewart, C.M., 2019, “A Modified Wilshire Model for Long-Term Creep Deformation Prediction,” Journal TBD, (in preparation).
  2. Hossain, Md. A., and Stewart C. M., 2019, “Stochastic Creep Modeling using Sine-Hyperbolic Creep-Damage Model,” Journal TBD, (in preparation).
  3. Haque, M.S., and Stewart C.M., 2019, “Metamodeling Time-Temperature Parameters for Creep,” ASM Journal of Pressure Vessel Technology (in preparation).
  4. Haque, M.S, and Stewart, C. M., 2019, “Comparative Analysis of the Sin-Hyperbolic and Kachanov–Rabotnov Creep-Damage Models,” International Journal of Pressure Vessels and Piping, (in-press), DOI PDF
  5. Haque, M.S, and Stewart, C. M., 2019, “The Disparate Data Problem: The Calibration of Creep Laws Across Test Type and Stress, Temperature, and Time Scales,” Theoretical and Applied Fracture Mechanics, 100, DOI PDF
  6. Stewart, C.M., Garcia, E., 2019, “Fatigue Crack Growth of a Hot Mix Asphalt using Digital Image Correlation,” International Journal of Fatigue, 120. DOI PDF
  7. Arrieta, E., Haque, M.S., Mireles, J., Stewart, C.M., Carrasco, C., and Wicker, R., 2019, “Mechanical behavior of differently oriented EBM Ti-6Al-4V components using digital image correlation,” Journal of Engineering Materials and Technology, 141(1). DOI PDF
  8. Stewart, C. M., Oputa, C.W., and Garcia, E., 2018, “Effect of Specimen Thickness on Fracture Resistance of Hot Mix Asphalt in Disk-Shaped Compact Tension (DCT) Configuration,” Construction and Building Materials, 160, pp. 487-496. DOI PDF
  9. Kim, H., Torres, F., Chavez, L. A., Islam, M. T.; Islam, M. D.; Garcia Rosales, C. A., Stewart, C. M.; Noveron, J. C., Tseng, T-L. B., and Lin, Y., 2017, “Increased piezoelectric response in functional nanocomposites through MWCNT interface and fused-deposition modeling 3D printing,” MRS Communications, 7(4), DOI  PDF
  10. Kim, H. J., Torres, F., Villagran, D., Stewart, C., Lin Y., and Tseng, T.-L. B., 2017, “3D Printing of BaTiO3/PVDF Composites with Electric In Situ Poling for Pressure Sensor Applications,” Macromolecular Materials and Engineering, 302(11), DOI PDF
  11. Haque, M. S., and Stewart, C. M., 2017, “The Stress-Sensitivity, Mesh-Dependence, and Convergence of Continuum Damage Mechanics Models for Creep,” ASME Journal of Pressure Vessel Technology, 139(4). DOI PDF
  12. Stewart, C. M., Reyes, J.G., and Garcia, V. M., 2017, “Comparison of Fracture Test Standards for a Super Pave Dense-Graded Hot Mix Asphalt,” Engineering Fracture Mechanics, 169. DOI PDF
  13. Joddar, B., Garcia, E., Casas, A., Stewart, C.M., 2016, “Development of functionalized multi-walled carbon-nanotube-based alginate hydrogels for enabling biomimetic technologies,” Nature Scientific Reports, 6(32456). DOI PDF
  14. Haque, M. S., and Stewart, C. M., 2016, “Finite Element Analysis of Waspaloy Using Sinh Creep-Damage Constitutive Model under Triaxial Stress State,” ASME Journal of Pressure Vessel Technology, 138(3). DOI PDF
  15. Varela, L. A., and Stewart, C. M., 2016, “Modeling the Creep of Hastelloy X and the Fatigue of 304 Stainless Steel using the Miller and Walker Unified Viscoplastic Constitutive Models,” Journal of Engineering Materials and Technology, 138(2). DOI PDF
  16. Stewart, C. M., 2015, Implementing MasteringEngineering To Flip The Classroom And Improve Success Rates, Case Study, Pearson Education Inc. PDF
  17. Stewart, C. M., and Gordon, A. P., 2012, “Constitutive Modeling of Multistage Creep Damage in Isotropic and Transversely-Isotropic Alloys with Elastic Damage,” Journal of Pressure Vessel Technology, 134(4), pp. 1-8. DOI PDF
  18. Stewart, C. M., and Gordon, A. P., 2011, “Strain and Damage-Based Analytical Methods to Determine the Kachanov-Rabotnov Tertiary Creep Damage Constants,” International Journal of Damage Mechanics, 21(8), pp. 1186-1201. DOI PDF
  19. Stewart, C. M., Gordon, A. P., Ma, Y. W., and Neu, R. W., 2011, “An Anisotropic Tertiary Creep-Damage Constitutive Model for Anisotropic Materials,” International Journal of Pressure Vessel and Piping, 88(8-9), pp. 356-364. DOI PDF
  20. Stewart, C. M., Gordon, A. P., Ma, Y. W., and Neu, R. W., 2011, “An Improved Anisotropic Tertiary Creep Damage Formulation,” Journal of Pressure Vessel Technology, 135(5), pp.1-10. DOI PDF
  21. Stewart, C. M., Gordon, A. P., Hogan, E. A., and Saxena, A. 2011, “Characterization Of The Creep Deformation And Rupture Behavior Of DS GTD-111 Using The Kachanov-Rabotnov Constitutive Model,” Journal of Engineering Materials and Technology, 133(2), pp.1-11. DOI PDF
  22. Stewart, C. M., and Gordon, A. P., 2009, “Modeling the Temperature Dependence of Tertiary Creep Damage of a Ni-base Alloy,” Journal of Pressure Vessel Technology, 131(5), pp.1-11. DOI PDF
  23. Stewart, C. M., and Gordon, A. P., 2008, “Modeling the Temperature Dependence of Tertiary Creep Damage of a Ni-Base Alloy,” ASME Early Career Technical Journal, 7(1), pp. 1-8. PDF

Conference Papers

  1. Hossain, A., and Stewart, C.M., 2019, “Reliability Prediction of Sine-Hyperbolic Creep-Damage Model using Monte Carlo Simulation Method,” ASME PVP 2019, San Antonio, Texas, July 14 – 19, 2019.
  2. Cano, J., and Stewart, C.M., 2019, “Application of the Wilshire Stress-Rupture and Minimum-Creep-Strain-Rate Prediction Models for Alloy P91 in Tube, Plate And Pipe Form,” ASME TurboExpo 2019, Phoenix, Arizona, June 17-21, 2019.
  3. Mach, R., Haynes, A., Pellicote, J., and Stewart, C.M., 2019, “Assessment of Long Term Creep using Strain Rate Matching from the Stepped Isostress Method,” ASME TurboExpo 2019, Phoenix, Arizona, June 17-21, 2019.
  4. Perez, J., and Stewart, C.M., 2019, “Asssessment of the Theta Projection Model for Interpolating Creep Deformation,” ASME TurboExpo 2019, Phoenix, Arizona, June 17-21, 2019.
  5. Vega, R., and Stewart, C.M., 2019, “Development and Application Of Minimum Creep Strain Rate Metamodeling,” ASME TurboExpo 2019, Phoenix, Arizona, June 17-21, 2019.
  6. Pellicotte, J., Cotto, M., and Stewart, C.M., 2019, “Assessment of Calibration Approaches for The Stress Relaxation Test,” ASME TurboExpo 2019, Phoenix, Arizona, June 17-21, 2019.
  7. Arrieta, E., Mireles, J., Stewart, C.M., Carrasco, C., and Wicker, R.B., 2018, “Finite Element Modeling of Metal Lattice Using Commercial FEA Platforms,” 29th Annual International Solid Freeform Fabrication Symposium, Austin, TX, August 13-15, 2018. [PDF]
  8. Arrieta, E., Mireles, J., Stewart, C.M., Carrasco, C., and Wicker, R.B., 2017, “Multiscale Analysis of Cellular Solids Fabricated by EBM,” 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, TX, August 7-9, 2017. [PDF]
  9. Haque, M. S., and Stewart, C. M., 2017, “Selection of Representative Stress Function under Multiaxial Stress State Condition for Creep,” ASME PVP 2017, PVP2017-65296, Waikoloa, HI, July 16-20, 2017. DOI
  10. Haque, M. S., Ramirez, C., and Stewart, C. M., 2017, “A Novel Metamodeling Approach for Time-Temperature Parameter Models,” ASME PVP 2017, PVP2017-65297, Waikoloa, HI, July 16-20, 2017. DOI
  11. Ramirez, C., Haque, M. S., and C. M. Stewart, 2017, “Guidelines to the Assessment of Creep Rupture Reliability for 316SS using the Larson-Miller Time-Temperature Parameter Model,” ASME PVP 2017, PVP2017-65816, Waikoloa, HI, July 16-20, 2017. DOI
  12. Garcia, E., and Stewart, C. M., 2016, “Stress Corrosion Cracking in Generic Aluminum Foil under 3.5% NaCl Solution” ASME IMECE 2016, IMECE2016-66296, Phoenix, Arizona, November 11-17, 2016. DOI
  13. Haque, M. S., Arrieta, E., Mireles, J., Carrasco, C., Stewart, C. M., and Wicker, R., 2016, “Mechanical Behavior and Microstructure of Electron Beam Melted Ti-6Al-4V Using Digital Image Correlation,” ASME IMECE 2016, IMECE2016-66178, Phoenix, Arizona, November 11-17, 2016. DOI
  14. Haque, M. S., and Stewart, C. M., 2016, “Exploiting Functional Relationships between MPC Omega, Theta, and Sinh-Hyperbolic Models,” ASME PVP 2016, PVP2016-63089, Vancouver, BC, Canada, July 17-21, 2016. DOI
  15. Haque, M. S., and Stewart, C. M., 2016, “Modeling the Creep Deformation, Damage, and Rupture of Hastelloy X using MPC Omega, Theta, and Sin-Hyperbolic Models,” ASME PVP 2016, PVP2016-63029, Vancouver, BC, Canada, July 17-21, 2016. DOI
  16. Ramos, E., Gutierrez, A., Tirado, C., Stewart, C., Abdallah, I., and Nazarian, S, 2016, “Explaining Overlay Tester Results with Digital Image Correlation and Finite Element Analysis,” ASCE 2016 International Conference for Transportation and Development, Houston TX, June 26-29, 2016. DOI
  17. Cardenas, J. A., and Stewart, C. M., 2015, “Tensile Properties of Polylactic Acid (PLA) Additive Manufactured Parts,” ASME IMECE 2015, IMECE2015-52274, Houston, TX, November 13-19, 2015. DOI
  18. Haque, M. S., and Stewart, C. M., 2015, “A Novel Sin-Hyperbolic Creep Damage Model to Overcome the Mesh Dependency of Classic Local approach Kachanov-Rabotnov Model” ASME IMECE 2015, IMECE2015-50427, Houston, TX, November 13-19, 2015. DOI
  19. Varela, L. A., and Stewart, C. M., 2015, “Development of a Novel Hybrid Unified Viscoplastic Constitutive Model” ASME IMECE 2015, IMECE2015-50390, Houston, TX, November 13-19, 2015. DOI
  20. Varela, L. A., Stewart, C.M., and Gordon, A.P., 2015, “Modeling the Creep of Hastelloy X Using the Miller and Walker Unified Viscoplastic Constitutive Models,” ASME PVP 2015, Boston, MA, July 19-23, 2015. DOI
  21. Haque, M. S., and Stewart, C. M., 2015, “Comparison Of A New Sin-Hyperbolic Creep Damage Constitutive Model With The Classic Kachanov-Rabotnov Model Using Theoretical And Numerical Analysis,” 2015 TMS Annual Meeting & Exhibition, Orlando, FL, March 15-19, 2015. DOI
  22. Stewart, C. M., and Gordon, A. P., 2013,”Creep Crack Growth Simulation of Ni-Base Superalloy,” ASME Turbo Expo 2013, San Antonio, TX, June 3-7, 2013. 10.1115/GT2013-96005
  23. Stewart, C. M., and Gordon, A. P., 2012, “Methods to Determine the Critical Damage Criterion of the Kachanov-Rabotnov Law,” ASME IMECE 2012, IMECE2012-88389, Houston, TX, November, 9-15, 2012. DOI
  24. Stewart, C. M., and Gordon, A. P., 2011, “A Multistage Creep Damage Constitutive Model for Isotropic and Transversely-Isotropic Materials with Elastic Damage,” ASME PVP 2011, PVP2011-57049, Baltimore, Maryland, July, 17-21, 2011. DOI
  25. Stewart, C. M., and Gordon, A. P., 2011, “Anisotropic Creep Damage And Elastic Damage of Notched Directionally Solidified Materials,” ASME Turbo Expo 2011, GT2011-46476, Vancouver, BC, Canada, June, 6-10, 2011. DOI
  26. Stewart, C. M., and Gordon, A. P., 2010, “Analytical Method to Determine the Tertiary Creep Damage Constants of the Kachanov-Rabotnov Constitutive Model,” ASME IMECE 2010, IMECE2010-39153, Vancouver, British Columbia, November 12-18, 2010. 10.1115/IMECE2010-39153
  27. Stewart, C. M., and Gordon, A. P., 2010, “Crack Initiation Modeling of Turbine Blade Cooling Holes under Creep Conditions,” 2010 Annual FCAAP Symposium & Exhibition, Tallahassee, FL, August 9-10, 2010.
  28. Stewart, C. M., and Gordon, A. P., 2010, “Modeling the Tertiary Creep Damage Behavior of a Transversely-Isotropic Material under Multiaxial and Periodic Loading Conditions,” ASME PVP 2010, PVP2010-25041, Bellevue, Washington, July 18-22, 2010. DOI
  29. DeMarco, J. P., Hogan, E. A., Stewart, C. M., and Gordon, A. P., 2010, “An Efficient Method for the Optimization of Viscoplastic Constitutive Model Constants,” ASME Turbo Expo 2010, GT2010-23311, Glasgow, UK, June 14-18, 2010. DOI
  30. Stewart, C. M., and Gordon, A. P., 2010, “A Creep Rupture Time Model for Anisotropic Creep-Damage of Transversely-Isotropic Materials,” ASME Turbo Expo 2010, GT2010-22532, Glasgow, UK, June 14-18, 2010. DOI
  31. Stewart, C. M., Hogan, E. A., and Gordon, A. P., 2009, “Modeling the Temperature-Dependence of Tertiary Creep Damage of a Directionally Solidified Ni-Base Superalloy,” ASME IMECE 2009, Lake Buena Vista, FL, November 13-19, 2009. DOI
  32. Stewart, C. M., and Gordon, A. P., 2009, “A Novel Anisotropic Tertiary Creep Damage Model for Transversely Isotropic Materials,” 12th International Conference on Pressure Vessel Technology, Jeju Island, KOREA, September 20-23, 2009.
  33. Stewart, C. M., Gordon, A. P., and Nicholson, D. W., 2009, “Numerical Simulation of Temperature-Dependent, Anisotropic Tertiary Creep Damage,” 47th AIAA Aerospace Sciences Meeting, Orlando, FL, January 5-8 2009. DOI
  34. Stewart, C. M., and Gordon A. P., 2008 “Modeling the Temperature Dependence of Tertiary Creep Damage of a Ni-Base Alloy,” ASME Early Career Technical Conference, Miami, FL, October 3-4, 2008.